intersight.getVnicFcIfInventory

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryFcAdapterPolicy

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryFcNetworkPolicy

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryFcQosPolicy

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryFcZonePolicy

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryParent

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryPermissionResource

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryPlacement

AutoPciLink bool

Enable or disable automatic assignment of the PCI Link in a dual-link adapter. This option applies only to 13xx series VICs that support dual-link. If enabled, the system determines the placement of the vNIC/vHBA on either of the PCI Links.

AutoSlotId bool

Enable or disable automatic assignment of the VIC slot ID. If enabled and the server has only one VIC, the same VIC is chosen for all the vNICs. If enabled and the server has multiple VICs, the vNIC/vHBA are deployed on the first VIC. The Slot ID determines the first VIC. MLOM is the first Slot ID and the ID increments to 2, 3, and so on.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Id string

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

PciLink double

The PCI Link used as transport for the virtual interface. PCI Link is only applicable for select Cisco UCS VIC 1300 models (UCSC-PCIE-C40Q-03, UCSB-MLOM-40G-03, UCSB-VIC-M83-8P) that support two PCI links. The value, if specified, for any other VIC model will be ignored.

PciLinkAssignmentMode string

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

SwitchId string

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

Uplink double

Adapter port on which the virtual interface will be created.

AutoPciLink bool

AutoSlotId bool

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Id string

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

PciLink float64

PciLinkAssignmentMode string

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

SwitchId string

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

Uplink float64

Adapter port on which the virtual interface will be created.

autoPciLink Boolean

autoSlotId Boolean

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

id String

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

pciLink Double

pciLinkAssignmentMode String

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

switchId String

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

uplink Double

Adapter port on which the virtual interface will be created.

autoPciLink boolean

autoSlotId boolean

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

id string

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

objectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

pciLink number

pciLinkAssignmentMode string

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

switchId string

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

uplink number

Adapter port on which the virtual interface will be created.

auto_pci_link bool

auto_slot_id bool

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

id str

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

pci_link float

pci_link_assignment_mode str

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

switch_id str

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

uplink float

Adapter port on which the virtual interface will be created.

autoPciLink Boolean

autoSlotId Boolean

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

id String

PCIe Slot where the VIC adapter is installed. Supported values are (1-15) and MLOM.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

pciLink Number

pciLinkAssignmentMode String

If the autoPciLink is disabled, the user can either choose to place the vNICs manually or based on a policy.If the autoPciLink is enabled, it will be set to None.

Custom - The user needs to specify the PCI Link manually.
Load-Balanced - The system will uniformly distribute the interfaces across the PCI Links.
None - Assignment is not applicable and will be set when the AutoPciLink is set to true.

switchId String

The fabric port to which the vNICs will be associated.

None - Fabric Id is not set to either A or B for the standalone case where the server is not connected to Fabric Interconnects. The value 'None' should be used.
A - Fabric A of the FI cluster.
B - Fabric B of the FI cluster.

uplink Number

Adapter port on which the virtual interface will be created.

GetVnicFcIfInventoryResult

AccountMoid string: The Account ID for this managed object.
AdditionalProperties string
Ancestors List<GetVnicFcIfInventoryResultAncestor>
ClassId string
CreateTime string: The time when this managed object was created.
DeviceMoId string: Device ID of the entity from where inventory is reported.
DomainGroupMoid string: The DomainGroup ID for this managed object.
FcAdapterPolicies List<GetVnicFcIfInventoryResultFcAdapterPolicy>
FcNetworkPolicies List<GetVnicFcIfInventoryResultFcNetworkPolicy>
FcQosPolicies List<GetVnicFcIfInventoryResultFcQosPolicy>
FcZonePolicies List<GetVnicFcIfInventoryResultFcZonePolicy>
ModTime string: The time when this managed object was last modified.
Moid string: The unique identifier of this Managed Object instance.
Name string: Name of the virtual fibre channel interface.
ObjectType string
Order double: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
OverriddenLists List<string>
Owners List<string>
Parents List<GetVnicFcIfInventoryResultParent>
PermissionResources List<GetVnicFcIfInventoryResultPermissionResource>
PersistentBindings bool: Enables retention of LUN ID associations in memory until they are manually cleared.
PinGroupName string: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
Placements List<GetVnicFcIfInventoryResultPlacement>
SanConnectivityPolicies List<GetVnicFcIfInventoryResultSanConnectivityPolicy>
ScpVhbas List<GetVnicFcIfInventoryResultScpVhba>
SharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
SpVhbas List<GetVnicFcIfInventoryResultSpVhba>
SrcTemplates List<GetVnicFcIfInventoryResultSrcTemplate>
StaticWwpnAddress string: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
Tags List<GetVnicFcIfInventoryResultTag>
TemplateActions List<GetVnicFcIfInventoryResultTemplateAction>
TemplateSyncErrors List<GetVnicFcIfInventoryResultTemplateSyncError>
TemplateSyncStatus string: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
VersionContexts List<GetVnicFcIfInventoryResultVersionContext>
VifId double: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
Wwpn string: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
WwpnAddressType string: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
WwpnLeases List<GetVnicFcIfInventoryResultWwpnLease>
WwpnPools List<GetVnicFcIfInventoryResultWwpnPool>

AccountMoid string: The Account ID for this managed object.
AdditionalProperties string
Ancestors []GetVnicFcIfInventoryResultAncestor
ClassId string
CreateTime string: The time when this managed object was created.
DeviceMoId string: Device ID of the entity from where inventory is reported.
DomainGroupMoid string: The DomainGroup ID for this managed object.
FcAdapterPolicies []GetVnicFcIfInventoryResultFcAdapterPolicy
FcNetworkPolicies []GetVnicFcIfInventoryResultFcNetworkPolicy
FcQosPolicies []GetVnicFcIfInventoryResultFcQosPolicy
FcZonePolicies []GetVnicFcIfInventoryResultFcZonePolicy
ModTime string: The time when this managed object was last modified.
Moid string: The unique identifier of this Managed Object instance.
Name string: Name of the virtual fibre channel interface.
ObjectType string
Order float64: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
OverriddenLists []string
Owners []string
Parents []GetVnicFcIfInventoryResultParent
PermissionResources []GetVnicFcIfInventoryResultPermissionResource
PersistentBindings bool: Enables retention of LUN ID associations in memory until they are manually cleared.
PinGroupName string: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
Placements []GetVnicFcIfInventoryResultPlacement
SanConnectivityPolicies []GetVnicFcIfInventoryResultSanConnectivityPolicy
ScpVhbas []GetVnicFcIfInventoryResultScpVhba
SharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
SpVhbas []GetVnicFcIfInventoryResultSpVhba
SrcTemplates []GetVnicFcIfInventoryResultSrcTemplate
StaticWwpnAddress string: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
Tags []GetVnicFcIfInventoryResultTag
TemplateActions []GetVnicFcIfInventoryResultTemplateAction
TemplateSyncErrors []GetVnicFcIfInventoryResultTemplateSyncError
TemplateSyncStatus string: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
VersionContexts []GetVnicFcIfInventoryResultVersionContext
VifId float64: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
Wwpn string: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
WwpnAddressType string: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
WwpnLeases []GetVnicFcIfInventoryResultWwpnLease
WwpnPools []GetVnicFcIfInventoryResultWwpnPool

accountMoid String: The Account ID for this managed object.
additionalProperties String
ancestors List<GetVnicFcIfInventoryResultAncestor>
classId String
createTime String: The time when this managed object was created.
deviceMoId String: Device ID of the entity from where inventory is reported.
domainGroupMoid String: The DomainGroup ID for this managed object.
fcAdapterPolicies List<GetVnicFcIfInventoryResultFcAdapterPolicy>
fcNetworkPolicies List<GetVnicFcIfInventoryResultFcNetworkPolicy>
fcQosPolicies List<GetVnicFcIfInventoryResultFcQosPolicy>
fcZonePolicies List<GetVnicFcIfInventoryResultFcZonePolicy>
modTime String: The time when this managed object was last modified.
moid String: The unique identifier of this Managed Object instance.
name String: Name of the virtual fibre channel interface.
objectType String
order Double: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
overriddenLists List<String>
owners List<String>
parents List<GetVnicFcIfInventoryResultParent>
permissionResources List<GetVnicFcIfInventoryResultPermissionResource>
persistentBindings Boolean: Enables retention of LUN ID associations in memory until they are manually cleared.
pinGroupName String: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
placements List<GetVnicFcIfInventoryResultPlacement>
sanConnectivityPolicies List<GetVnicFcIfInventoryResultSanConnectivityPolicy>
scpVhbas List<GetVnicFcIfInventoryResultScpVhba>
sharedScope String: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
spVhbas List<GetVnicFcIfInventoryResultSpVhba>
srcTemplates List<GetVnicFcIfInventoryResultSrcTemplate>
staticWwpnAddress String: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
tags List<GetVnicFcIfInventoryResultTag>
templateActions List<GetVnicFcIfInventoryResultTemplateAction>
templateSyncErrors List<GetVnicFcIfInventoryResultTemplateSyncError>
templateSyncStatus String: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
versionContexts List<GetVnicFcIfInventoryResultVersionContext>
vifId Double: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
wwpn String: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
wwpnAddressType String: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
wwpnLeases List<GetVnicFcIfInventoryResultWwpnLease>
wwpnPools List<GetVnicFcIfInventoryResultWwpnPool>

accountMoid string: The Account ID for this managed object.
additionalProperties string
ancestors GetVnicFcIfInventoryResultAncestor[]
classId string
createTime string: The time when this managed object was created.
deviceMoId string: Device ID of the entity from where inventory is reported.
domainGroupMoid string: The DomainGroup ID for this managed object.
fcAdapterPolicies GetVnicFcIfInventoryResultFcAdapterPolicy[]
fcNetworkPolicies GetVnicFcIfInventoryResultFcNetworkPolicy[]
fcQosPolicies GetVnicFcIfInventoryResultFcQosPolicy[]
fcZonePolicies GetVnicFcIfInventoryResultFcZonePolicy[]
modTime string: The time when this managed object was last modified.
moid string: The unique identifier of this Managed Object instance.
name string: Name of the virtual fibre channel interface.
objectType string
order number: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
overriddenLists string[]
owners string[]
parents GetVnicFcIfInventoryResultParent[]
permissionResources GetVnicFcIfInventoryResultPermissionResource[]
persistentBindings boolean: Enables retention of LUN ID associations in memory until they are manually cleared.
pinGroupName string: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
placements GetVnicFcIfInventoryResultPlacement[]
sanConnectivityPolicies GetVnicFcIfInventoryResultSanConnectivityPolicy[]
scpVhbas GetVnicFcIfInventoryResultScpVhba[]
sharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
spVhbas GetVnicFcIfInventoryResultSpVhba[]
srcTemplates GetVnicFcIfInventoryResultSrcTemplate[]
staticWwpnAddress string: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
tags GetVnicFcIfInventoryResultTag[]
templateActions GetVnicFcIfInventoryResultTemplateAction[]
templateSyncErrors GetVnicFcIfInventoryResultTemplateSyncError[]
templateSyncStatus string: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
versionContexts GetVnicFcIfInventoryResultVersionContext[]
vifId number: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
wwpn string: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
wwpnAddressType string: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
wwpnLeases GetVnicFcIfInventoryResultWwpnLease[]
wwpnPools GetVnicFcIfInventoryResultWwpnPool[]

account_moid str: The Account ID for this managed object.
additional_properties str
ancestors Sequence[GetVnicFcIfInventoryResultAncestor]
class_id str
create_time str: The time when this managed object was created.
device_mo_id str: Device ID of the entity from where inventory is reported.
domain_group_moid str: The DomainGroup ID for this managed object.
fc_adapter_policies Sequence[GetVnicFcIfInventoryResultFcAdapterPolicy]
fc_network_policies Sequence[GetVnicFcIfInventoryResultFcNetworkPolicy]
fc_qos_policies Sequence[GetVnicFcIfInventoryResultFcQosPolicy]
fc_zone_policies Sequence[GetVnicFcIfInventoryResultFcZonePolicy]
mod_time str: The time when this managed object was last modified.
moid str: The unique identifier of this Managed Object instance.
name str: Name of the virtual fibre channel interface.
object_type str
order float: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
overridden_lists Sequence[str]
owners Sequence[str]
parents Sequence[GetVnicFcIfInventoryResultParent]
permission_resources Sequence[GetVnicFcIfInventoryResultPermissionResource]
persistent_bindings bool: Enables retention of LUN ID associations in memory until they are manually cleared.
pin_group_name str: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
placements Sequence[GetVnicFcIfInventoryResultPlacement]
san_connectivity_policies Sequence[GetVnicFcIfInventoryResultSanConnectivityPolicy]
scp_vhbas Sequence[GetVnicFcIfInventoryResultScpVhba]
shared_scope str: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
sp_vhbas Sequence[GetVnicFcIfInventoryResultSpVhba]
src_templates Sequence[GetVnicFcIfInventoryResultSrcTemplate]
static_wwpn_address str: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
tags Sequence[GetVnicFcIfInventoryResultTag]
template_actions Sequence[GetVnicFcIfInventoryResultTemplateAction]
template_sync_errors Sequence[GetVnicFcIfInventoryResultTemplateSyncError]
template_sync_status str: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
type str: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
version_contexts Sequence[GetVnicFcIfInventoryResultVersionContext]
vif_id float: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
wwpn str: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
wwpn_address_type str: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
wwpn_leases Sequence[GetVnicFcIfInventoryResultWwpnLease]
wwpn_pools Sequence[GetVnicFcIfInventoryResultWwpnPool]

accountMoid String: The Account ID for this managed object.
additionalProperties String
ancestors List<Property Map>
classId String
createTime String: The time when this managed object was created.
deviceMoId String: Device ID of the entity from where inventory is reported.
domainGroupMoid String: The DomainGroup ID for this managed object.
fcAdapterPolicies List<Property Map>
fcNetworkPolicies List<Property Map>
fcQosPolicies List<Property Map>
fcZonePolicies List<Property Map>
modTime String: The time when this managed object was last modified.
moid String: The unique identifier of this Managed Object instance.
name String: Name of the virtual fibre channel interface.
objectType String
order Number: The order in which the virtual interface is brought up. The order assigned to an interface should be unique for all the Ethernet and Fibre-Channel interfaces on each PCI link on a VIC adapter. The order should start from zero with no overlaps. The maximum value of PCI order is limited by the number of virtual interfaces (Ethernet and Fibre-Channel) on each PCI link on a VIC adapter. All VIC adapters have a single PCI link except VIC 1340, VIC 1380 and VIC 1385 which have two.
overriddenLists List<String>
owners List<String>
parents List<Property Map>
permissionResources List<Property Map>
persistentBindings Boolean: Enables retention of LUN ID associations in memory until they are manually cleared.
pinGroupName String: Pingroup name associated to vfc for static pinning. SCP deploy will resolve pingroup name and fetches the correspoding uplink port/port channel to pin the vfc traffic.
placements List<Property Map>
sanConnectivityPolicies List<Property Map>
scpVhbas List<Property Map>
sharedScope String: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
spVhbas List<Property Map>
srcTemplates List<Property Map>
staticWwpnAddress String: The WWPN address must be in hexadecimal format xx:xx:xx:xx:xx:xx:xx:xx.Allowed ranges are 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF.To ensure uniqueness of WWN's in the SAN fabric, you are strongly encouraged to use the WWN prefix - 20:00:00:25:B5:xx:xx:xx.
tags List<Property Map>
templateActions List<Property Map>
templateSyncErrors List<Property Map>
templateSyncStatus String: The sync status of the current MO wrt the attached Template MO.* None - The Enum value represents that the object is not attached to any template.* OK - The Enum value represents that the object values are in sync with attached template.* Scheduled - The Enum value represents that the object sync from attached template is scheduled from template.* InProgress - The Enum value represents that the object sync with the attached template is in progress.* OutOfSync - The Enum value represents that the object values are not in sync with attached template.
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.
versionContexts List<Property Map>
vifId Number: This should be the same as the channel number of the vfc created on switch in order to set up the data path. The property is applicable only for FI attached servers where a vfc is created on the switch for every vHBA.
wwpn String: The WWPN address that is assigned to the vHBA based on the wwn pool that has been assigned to the SAN Connectivity Policy.
wwpnAddressType String: Type of allocation selected to assign a WWPN address to the vhba.* POOL - The user selects a pool from which the mac/wwn address will be leased for the Virtual Interface.* STATIC - The user assigns a static mac/wwn address for the Virtual Interface.
wwpnLeases List<Property Map>
wwpnPools List<Property Map>

GetVnicFcIfInventoryResultAncestor

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultFcAdapterPolicy

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultFcNetworkPolicy

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultFcQosPolicy

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultFcZonePolicy

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultParent

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultPermissionResource

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultPlacement

AdditionalProperties string
AutoPciLink bool
AutoSlotId bool
ClassId string
Id string
ObjectType string
PciLink double
PciLinkAssignmentMode string
SwitchId string
Uplink double

AdditionalProperties string
AutoPciLink bool
AutoSlotId bool
ClassId string
Id string
ObjectType string
PciLink float64
PciLinkAssignmentMode string
SwitchId string
Uplink float64

additionalProperties String
autoPciLink Boolean
autoSlotId Boolean
classId String
id String
objectType String
pciLink Double
pciLinkAssignmentMode String
switchId String
uplink Double

additionalProperties string
autoPciLink boolean
autoSlotId boolean
classId string
id string
objectType string
pciLink number
pciLinkAssignmentMode string
switchId string
uplink number

additional_properties str
auto_pci_link bool
auto_slot_id bool
class_id str
id str
object_type str
pci_link float
pci_link_assignment_mode str
switch_id str
uplink float

additionalProperties String
autoPciLink Boolean
autoSlotId Boolean
classId String
id String
objectType String
pciLink Number
pciLinkAssignmentMode String
switchId String
uplink Number

GetVnicFcIfInventoryResultSanConnectivityPolicy

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultScpVhba

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultSpVhba

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultSrcTemplate

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultTag

AdditionalProperties string
Key string
Value string

AdditionalProperties string
Key string
Value string

additionalProperties String
key String
value String

additionalProperties string
key string
value string

additional_properties str
key str
value str

additionalProperties String
key String
value String

GetVnicFcIfInventoryResultTemplateAction

AdditionalProperties string
ClassId string
ObjectType string
Params List<GetVnicFcIfInventoryResultTemplateActionParam>
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

AdditionalProperties string
ClassId string
ObjectType string
Params []GetVnicFcIfInventoryResultTemplateActionParam
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String
objectType String
params List<GetVnicFcIfInventoryResultTemplateActionParam>
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties string
classId string
objectType string
params GetVnicFcIfInventoryResultTemplateActionParam[]
type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additional_properties str
class_id str
object_type str
params Sequence[GetVnicFcIfInventoryResultTemplateActionParam]
type str: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String
objectType String
params List<Property Map>
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

GetVnicFcIfInventoryResultTemplateActionParam

AdditionalProperties string
ClassId string
Name string: Name of the virtual fibre channel interface.
ObjectType string
Value string

AdditionalProperties string
ClassId string
Name string: Name of the virtual fibre channel interface.
ObjectType string
Value string

additionalProperties String
classId String
name String: Name of the virtual fibre channel interface.
objectType String
value String

additionalProperties string
classId string
name string: Name of the virtual fibre channel interface.
objectType string
value string

additional_properties str
class_id str
name str: Name of the virtual fibre channel interface.
object_type str
value str

additionalProperties String
classId String
name String: Name of the virtual fibre channel interface.
objectType String
value String

GetVnicFcIfInventoryResultTemplateSyncError

AdditionalProperties string
ClassId string
Message string
ObjectType string
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

AdditionalProperties string
ClassId string
Message string
ObjectType string
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String
message String
objectType String
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties string
classId string
message string
objectType string
type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additional_properties str
class_id str
message str
object_type str
type str: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String
message String
objectType String
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

GetVnicFcIfInventoryResultVersionContext

AdditionalProperties string
ClassId string
InterestedMos List<GetVnicFcIfInventoryResultVersionContextInterestedMo>
MarkedForDeletion bool
NrVersion string
ObjectType string
RefMos List<GetVnicFcIfInventoryResultVersionContextRefMo>
Timestamp string
VersionType string

AdditionalProperties string
ClassId string
InterestedMos []GetVnicFcIfInventoryResultVersionContextInterestedMo
MarkedForDeletion bool
NrVersion string
ObjectType string
RefMos []GetVnicFcIfInventoryResultVersionContextRefMo
Timestamp string
VersionType string

additionalProperties String
classId String
interestedMos List<GetVnicFcIfInventoryResultVersionContextInterestedMo>
markedForDeletion Boolean
nrVersion String
objectType String
refMos List<GetVnicFcIfInventoryResultVersionContextRefMo>
timestamp String
versionType String

additionalProperties string
classId string
interestedMos GetVnicFcIfInventoryResultVersionContextInterestedMo[]
markedForDeletion boolean
nrVersion string
objectType string
refMos GetVnicFcIfInventoryResultVersionContextRefMo[]
timestamp string
versionType string

additional_properties str
class_id str
interested_mos Sequence[GetVnicFcIfInventoryResultVersionContextInterestedMo]
marked_for_deletion bool
nr_version str
object_type str
ref_mos Sequence[GetVnicFcIfInventoryResultVersionContextRefMo]
timestamp str
version_type str

additionalProperties String
classId String
interestedMos List<Property Map>
markedForDeletion Boolean
nrVersion String
objectType String
refMos List<Property Map>
timestamp String
versionType String

GetVnicFcIfInventoryResultVersionContextInterestedMo

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultVersionContextRefMo

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultWwpnLease

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventoryResultWwpnPool

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetVnicFcIfInventorySanConnectivityPolicy

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryScpVhba

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventorySpVhba

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventorySrcTemplate

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryTag

AdditionalProperties string
Key string: The string representation of a tag key.
Value string: The string representation of a tag value.

AdditionalProperties string
Key string: The string representation of a tag key.
Value string: The string representation of a tag value.

additionalProperties String
key String: The string representation of a tag key.
value String: The string representation of a tag value.

additionalProperties string
key string: The string representation of a tag key.
value string: The string representation of a tag value.

additional_properties str
key str: The string representation of a tag key.
value str: The string representation of a tag value.

additionalProperties String
key String: The string representation of a tag key.
value String: The string representation of a tag value.

GetVnicFcIfInventoryTemplateAction

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Params List<GetVnicFcIfInventoryTemplateActionParam>
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Params []GetVnicFcIfInventoryTemplateActionParam
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
params List<GetVnicFcIfInventoryTemplateActionParam>
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties string
classId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
objectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
params GetVnicFcIfInventoryTemplateActionParam[]
type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additional_properties str
class_id str: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
object_type str: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
params Sequence[GetVnicFcIfInventoryTemplateActionParam]
type str: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
params List<Property Map>
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

GetVnicFcIfInventoryTemplateActionParam

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
Name string: Name of the virtual fibre channel interface.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Value string: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
Name string: Name of the virtual fibre channel interface.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Value string: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
name String: Name of the virtual fibre channel interface.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
value String: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

additionalProperties string
classId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
name string: Name of the virtual fibre channel interface.
objectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
value string: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

additional_properties str
class_id str: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
name str: Name of the virtual fibre channel interface.
object_type str: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
value str: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
name String: Name of the virtual fibre channel interface.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
value String: The action parameter value is based on the action parameter type. Supported action parameters and their values are- a) Name - SyncType, Supported Values - SyncFailed, SyncOne. b) Name - SyncTimer, Supported Values - 0 to 60 seconds. c) Name - OverriddenList, Supported Values - Comma Separated list of overridable configurations.

GetVnicFcIfInventoryTemplateSyncError

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
Message string: The localized message based on the locale setting of the user's context providing the error description.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

AdditionalProperties string
ClassId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
Message string: The localized message based on the locale setting of the user's context providing the error description.
ObjectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
Type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
message String: The localized message based on the locale setting of the user's context providing the error description.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties string
classId string: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
message string: The localized message based on the locale setting of the user's context providing the error description.
objectType string: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
type string: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additional_properties str
class_id str: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
message str: The localized message based on the locale setting of the user's context providing the error description.
object_type str: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
type str: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

additionalProperties String
classId String: The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.
message String: The localized message based on the locale setting of the user's context providing the error description.
objectType String: The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.
type String: VHBA Type configuration for SAN Connectivity Policy. This configuration is supported only on Cisco VIC 14XX series and higher series of adapters.* fc-initiator - The default value set for vHBA Type Configuration. Fc-initiator specifies vHBA as a consumer of storage. Enables SCSI commands to transfer data and status information between host and target storage systems.* fc-nvme-initiator - Fc-nvme-initiator specifies vHBA as a consumer of storage. Enables NVMe-based message commands to transfer data and status information between host and target storage systems.* fc-nvme-target - Fc-nvme-target specifies vHBA as a provider of storage volumes to initiators. Enables NVMe-based message commands to transfer data and status information between host and target storage systems. Currently tech-preview, only enabled with an asynchronous driver.* fc-target - Fc-target specifies vHBA as a provider of storage volumes to initiators. Enables SCSI commands to transfer data and status information between host and target storage systems. fc-target is enabled only with an asynchronous driver.

GetVnicFcIfInventoryVersionContext

InterestedMos List<GetVnicFcIfInventoryVersionContextInterestedMo>

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

MarkedForDeletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

NrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

RefMo GetVnicFcIfInventoryVersionContextRefMo

A reference to the original Managed Object.

Timestamp string

The time this versioned Managed Object was created.

VersionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

InterestedMos []GetVnicFcIfInventoryVersionContextInterestedMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

MarkedForDeletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

NrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

RefMo GetVnicFcIfInventoryVersionContextRefMo

A reference to the original Managed Object.

Timestamp string

The time this versioned Managed Object was created.

VersionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos List<GetVnicFcIfInventoryVersionContextInterestedMo>

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion Boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion String

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo GetVnicFcIfInventoryVersionContextRefMo

A reference to the original Managed Object.

timestamp String

The time this versioned Managed Object was created.

versionType String

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos GetVnicFcIfInventoryVersionContextInterestedMo[]

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo GetVnicFcIfInventoryVersionContextRefMo

A reference to the original Managed Object.

timestamp string

The time this versioned Managed Object was created.

versionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interested_mos Sequence[GetVnicFcIfInventoryVersionContextInterestedMo]

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

marked_for_deletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nr_version str

The version of the Managed Object, e.g. an incrementing number or a hash id.

ref_mo GetVnicFcIfInventoryVersionContextRefMo

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

A reference to the original Managed Object.

timestamp str

The time this versioned Managed Object was created.

version_type str

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos List<Property Map>

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion Boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion String

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo Property Map

A reference to the original Managed Object.

timestamp String

The time this versioned Managed Object was created.

versionType String

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

GetVnicFcIfInventoryVersionContextInterestedMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryVersionContextRefMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryWwpnLease

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetVnicFcIfInventoryWwpnPool

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.